-
When I flashing stc15f104e with stcgal in platformio ,I got some error message as below,I use vscode in debian.
what can I do
```
Processing STC15F104E (platform: intel_mcs51; board: STC15F104E)
…
-
Hello! In my scenario I want to use the system task as follows:
- "Min charge" threshold at 60%. If I remove external Power to the Pi, the PI should keep running until PiJuice battery is below 60%.
…
-
Our RocketLoggers do best in low-side power sensing, which means we need to monitor the current in the return path. To do this, we need to effectively isolate the grounds of every major component.
…
-
Since long time I am fighting to lower power consumption using this library to the levels reachable with Sdk examples!
I have run several examples, testing the uA level in different type of code.
If…
-
After one has built a High Precision GNSS local database of mac addresses and mobile towers subsequent selection of "low power" mode should not needlessly inflict notifications urging [or outright req…
-
How I installed it (needed to use the sd card for space)
opkg update && \
opkg install block-mount kmod-fs-ext4 kmod-usb-storage e2fsprogs && \
umount /dev/sda1
mkfs.ext4 /dev/sda1
mkdir -p /…
-
## System information
- CPU information(`cat /proc/cpuinfo | grep "model name" | uniq`): Tiger Lake
- GPU information(`lspci -nn | grep -E 'VGA|isplay`): Gen12(Or all the platforms which support B a…
-
Hello!
I must say you inspired me a little. Was thinking of making project like this for very long time but never had time to figure which eInk screens would work best and get drivers working.
I s…
-
We were seeing too high capacity_factors for Offwind with weather year 2013 (still testing for 2019). That's probably due to too high wind speeds from atlite. They should be corrected by a scaling fac…
-
swift run gpuinfo list
Building for debugging...
Build complete! (0.09s)
GPU name: Apple M3 Max
GPU vendor: Apple
GPU core count: 40
GPU clock frequency: 1.398 GHz
GPU bandwidth: 409.6 GB/s
GP…
schwa updated
2 weeks ago