-
```
What steps will reproduce the problem?
1.Connecting using BT serial port on W8P Czech is not possible
Problem I thing is in name of the serial port, it have 58 letters with
diacritics. Even Bet…
-
```
What steps will reproduce the problem?
1.Connecting using BT serial port on W8P Czech is not possible
Problem I thing is in name of the serial port, it have 58 letters with
diacritics. Even Bet…
-
```
What steps will reproduce the problem?
1.Connecting using BT serial port on W8P Czech is not possible
Problem I thing is in name of the serial port, it have 58 letters with
diacritics. Even Bet…
-
```
What steps will reproduce the problem?
1.Connecting using BT serial port on W8P Czech is not possible
Problem I thing is in name of the serial port, it have 58 letters with
diacritics. Even Bet…
-
Using the current master, I noticed that I get some of the (mavlink) packets sent from a device with different netid.
Having 3 radios A (`netid = 25`, plugged to pixhawk), B (`netid = 25`) and C (…
-
Hello,
I would like to ask if it is possible to change home position using local NED x,y not global lattitude, longitude coordinate?
According to [SET_HOME_POSITION](https://mavlink.io/en/messages…
-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …
-
```
What steps will reproduce the problem?
I bought CUAV Mavlink minimosd for my CX20, APM 2.5.2 v5.0 stock firmware. I
install to the UART Port, Tx and Rx crossed. connected to the Boscam TS5823 fpv…
-
```
What steps will reproduce the problem?
I bought CUAV Mavlink minimosd for my CX20, APM 2.5.2 v5.0 stock firmware. I
install to the UART Port, Tx and Rx crossed. connected to the Boscam TS5823 fpv…
-
```
What steps will reproduce the problem?
I bought CUAV Mavlink minimosd for my CX20, APM 2.5.2 v5.0 stock firmware. I
install to the UART Port, Tx and Rx crossed. connected to the Boscam TS5823 fpv…