-
### Printer model
mk3.5
### Describe the enhancement
when you make a selection in the steel sheet menu, under hardware, The selection is not highlighted or shown in a different color so it is impos…
-
**Printer type** - MK3S/+ with REVO Hotend
**MMU Upgrade** - N/A
**Is your enhancement related to a problem? Please describe.**
The MK3S/+ firmware includes an option under Settings/HW Setup/Nozz…
-
### Description of the bug
Sliced G-Code View Screen is 'blank' but G-Codes work.
Prusa Mk3S with Prusa Slicer 2.8.0.
### Project file & How to reproduce
[3MF Prusa Slicer 2.8.0.zip](https://git…
-
### Description of the bug
I recently sliced the exact same model for printing on both my MK2.5S and my MK3S+. What caught my eye was the difference in print time, for what I thought were nearly ide…
-
In colder climates the printer (MK3) powers up and goes to error min bed temp. After heating the bed with a hot air gun it clears to hot end min temp and after a little heating so does the hot end. I…
-
### Version
2.3.3+
### Operating system type + version
Windows 10
### 3D printer brand / version + firmware version (if known)
MK3S+
### Behavior
Number of tool changes is only shown in s…
-
Just printed and installed the new 45 degrees part fan assembly, and I think the part fan doesn't like that very much, it will makes a none periodically noise, it sounds like the fan bearing dosen’t s…
-
### Description of the bug
I have added 3 STL files with Cyrillic filenames.
A warning was shown for one of them.
Instead of the filename, only question marks are shown.
![image](https://github.…
-
### Version
2.4.1-beta1+x64
_Use `About->About PrusaSlicer` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-p…
-
**Printer type** - MK3S+ with Revo HF & 0.6mm ObXidian Nozzle
**Printer firmware version** - MK3S-E3DREVO_HF_60W_ENGLISH version 3_13_0_6873
**SD card or USB/Octoprint**
SD card
**Describe …
Qmodo updated
3 months ago