-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
My setup is two KH10.5 wired in parallel (master/slave enabled) and connected to full stacks of HV2600 8* batteries per inverter.
The inverter and batteries are all on the very latest firmware using …
-
Hi, I do not understand something from the documentation.
Both addresses for Total PV generation 13002 and Load Adjustment 13002
10 Load 1 adjustment mode
13002 U16
0: Timing mode;
1: ON/OFF mode…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…