-
This isn't really an "issue" per se, but ... I have an Odroid N2+ that isn't currently being used for anything. Would you (Vito?) find it useful if I attempted to install OnnxStream on the Odroid and …
-
### Basic Infos
#### Hardware
Hardware: NodeMCU 1.0 (ESP-12E Module)
Core Version: ??
### Description
Hi!
Can't establish OTA update using BasicOTA example code. Uplo…
-
This isn't a bug, I just wanted to share some info. I was able to get this working using the latest TFT_eSPI library - using the older custom_component method vs. the newer external_components method…
-
I'm trying to use a BMI160 on a GY-BMI160 breakout board. The naming convention on this board are quite funny, but I'm puzzled on the correct wiring.
The PIN are labeled as VIN, 3v3, GND - these ar…
-
I noticed in Undead that sometimes I'll tap and a cell will provide haptic feedback but not a clicking noise.
-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
**Describe the solution you'd like**…
-
I have a strange problem with a NMEA2000 device built with STM32F103 "blue pill" and MCP2515 board:
The device disappears from the bus when another device sends for the first time.
The device does…
-
Hi, I like to use the vs1053 in combination with the Pico. Do you have recommendations before I start?
Many thanks, Olaf
-
I've seen people report that Netflix now works natively in the SteamOS browser, but on my system (Alienware i7 Steam Machine, opted into brewmaster_beta, w/ beta steam client) I still see the "Whoops.…
-
I am using a Badger 2040 with what I believe is the latest firmware.
Filename: pimoroni-badger2040-v0.0.3-micropython-with-badger-os.uf2
I have noticed that there is sometimes a vertical banding (…
G8PTN updated
9 months ago