-
I'm getting some quite good results with my Arduino BLE setup (I'm using the more expensive, PARA BLE module with onboard antenna, which I've soldered into my TX16S), but even after playing around wit…
-
Battery Status does not work as described with Microsoft Laptop Go running Debian Sid
According to the Feature Matrix (https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Feat…
-
**Is your feature request related to a problem? Please describe.**
No
**Describe the solution you'd like**
For Light and Heat, I would like to be able to create multiple "Channels" that operate i…
-
Hi,
I have an MPCN running on SKR pro 1.2, motors runs onto 5 TMC2209 in UART. CNC is using a Neje PWM diode laser mounted on it
My machine has dual axis on X and Y, using respectively E0 and E1…
-
Hi I have a
[https://www.dell.com/en-au/shop/gaming-and-games/g15-ryzen-edition-gaming-laptop/spd/g-series-15-5515-laptop/hng551503au](https://www.dell.com/en-au/shop/gaming-and-games/g15-ryzen-edit…
-
Board: **MKS Robin Nano-V3.X**
I use PC14 and PB1 as controlled fans for layer fan and hotend fan (in that order).
I want to use the "Controller Fan" Marlin configuration to start and stop the b…
-
I have run into an issue where liquidctl previously was able to start (liquidctl initialize all), and no longer works now, this issue presents itself as soon as I run liquidctl and freezes the termina…
-
Hi!
First I want to express my words of admiration for this work! This project is beautiful!
Do you will be add support other boards? I have an MKS sbase v 1.3. And i want that klipper has support…
-
I got to the point Where I had to make a flash of the USB Port:
```
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: …
-
has support for anet a8
do you have support for automatic leveling?
Do you have temperature protection?