-
I have a Reprap discount full graphic smart controller connected to a K8200 (3DRag derivative).
U8glib is installed and #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER uncommented.
When compili…
-
I've had a number of failures when printing where the connection to the mcu appears to be lost.
I have the recommended power supply, a ground isolated USB cable (tried two new ones), however, rando…
-
I am having a problem with my BMP accessing global variables. My hardware is based on the STM32H743 chip. The application I am debugging is rather large (~300K code). I am using a native BMP with upgr…
-
Hi, I have a pi 3 with a fisheye camera (https://www.aliexpress.com/item/32982250982.html 5MP OV5647 Webcam) that comes with two IR lamp. I used to run motionEyeOS on it and the camera will switch to…
-
I have been comparing the A500 and B2000 internal floppy connector circuits. The A500 only supports one internal drive, because it turns the motor on only when DF0 is meant to spin. (Incidentally, can…
-
Hi,
I'm trying to run the following code from tutorial 02 in the python implementation on my windows machine:
```
import numpy as np
from brainstat.context.genetics import surface_genetic_exp…
-
From Spring Cloud gateway doc:
Spring Cloud Gateway is built on Spring Boot 2.x, Spring WebFlux, and Project Reactor. As a consequence, many of the familiar synchronous libraries (Spring Data and Spri…
-
Process to get this far:
1) Updated Raspbian and Klipper to latest.
2) Built Klipper and flashed MCU using make clean, make, make install
3) Setup a "basic" RAMPS config
4) Referenced: https://git…
-
In some cases, such as teaching it is useful to be able to swap x and y as response and explanatory variables. Support for this could be implemented in:
`stat_poly_eq()` and `stat_quant_eq()`
`stat_…
-
It would be good to be able to repeatedly scan an output and then observe the response on the corresponding input (eg. a cavity resonance or an atomic feature) in real time on a PC. This sounds fairl…