-
One of the Licor instruments has some double logging going on. It seems that every data line is being logged twice. But filtering the data is not trivial as there are also occasional corrupt lines/mis…
-
Hi.
ESP32 chip has a good feature: Bluetooth BLE. Which is much more power effective than WiFi, because WiFi was not designed to be power effective when powered by battery.
But BLE was designed spe…
-
Hi,
would you please add a license to this script?
Thanks!
rralf updated
5 years ago
-
Good afternoon. For some reason, I can't read the data. Can you tell me what's wrong? Here are the parameters that should be:
1. The speed is 9600;
2. 8 bits of data;
3. 1 stop bit;
4. Without par…
-
I have been doing some research looking at the communication between the wifi module and the stove.
Mi stove is an Edilkamin Blade H and the wifi module is a Wifi H (Astrel / HottoH)
It is an RS…
-
Also holds for:
```yaml
uart1:
baudrate:
in:
out:
uart2:
baudrate:
in:
out:
gnss:
gps:
glonass:
beidou:
```
USB baudrate still works though.
Seems like the int…
-
For use with a normal serial cable, what are the correct JP5 and JP6 settings?
-
------------------------------------------------------------
### Feature Request
Greetings. I'm developing hardware to accompany Marlin and other printer controllers. The way I'm doing this, is by…
-
Directly setting interface specific communication parameters as suggested in the documentation in the [Single Interface](https://pymeasure.readthedocs.io/en/latest/dev/adding_instruments.html#single-i…
-
I am new to Github so I hope this is the correct place for asking the following...
My experience is mainly hardware design but I have had some experience with embedded 'C'.
I have an arduino field d…
rodjt updated
9 years ago