-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
This appears in the Serial Monitor:
GSM Shield testing.
DB:ELSE
DB:ELSE
DB:ELSE
DB:CORRECT B…
-
```
Please i need help i m doing my final year project...... what i want is when
send sms "On" led should turn on and when i send sms "Off" led should turn off
but when i send sms "Off" PIR sensor s…
-
```
Ciao Boris,
ho da poco acquistato lo shield GSM con il modulo SIM900.
Fin'ora ho sempre usato le funzionalità GSM soprattutto l'invio di SMS con il
compilatore 0023.
Sono un paio di giorni che ce…
-
```
What steps will reproduce the problem?
GSM Shield testing.
DB:NO RESP
DB:NO RESP
DB:NO RESP
ERROR: SIM900 doesn't answer. Check power and serial pins in GSM.cpp
status=IDLE
use: GSM_Shield_GPRS…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino and change the phone number together with the
country code
2. Change the TxRx pins on my shield to pin 2&3 which stated in…
-
```
Hello guys.
I've been working on an interfacing system of GSM Shield SM5100-B with Arduino
UNO Rev 3. and a keypad and an LCD.
when I used the example to send an SMS from the Arduino staticall…
-
```
Good evening
The library is use with Arduino Mini Pro 5V and SIM900, and later 3.3V and
SIM908
Actually _cell is using pin 2 and 3 [SoftwareSerial _cell(2,3)]
This work fine, but if want to ad…
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Should allow the sketch to define pins used to communicate with SoftwareSerial
library.
Mus…
-
```
Good evening
The library is use with Arduino Mini Pro 5V and SIM900, and later 3.3V and
SIM908
Actually _cell is using pin 2 and 3 [SoftwareSerial _cell(2,3)]
This work fine, but if want to ad…
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Should allow the sketch to define pins used to communicate with SoftwareSerial
library.
Mus…