-
### What happened?
I have a setup with several Popp-TRVs (identical to Danfoss Ally TRVs), lots of Aqara sensors and two routers, all connected to a Sonoff USB Dongle 3.0 Plus. I run Home Assistant a…
-
A configurable temperature threshold for the heater mode for the Sonoff TH10/16 would be really useful - i.e
I am using a TH16 to trigger a system that heats a hot tub, and it's inefficient to have…
-
I run Powercalc in many switches. I have not encountered any problems. But I am faced with an error when measuring energy with my sensor, which I programmed to work On-Off at certain watt values on …
-
### The problem
Using Conbee II with ZHA on a Raspberry Pi 4, I'm unable to pair a Sonoff SNZB-01 button. I enabled ZHA debug logging and I'm not seeing anything relevant in there. I also tried lis…
-
Short description:
To use the RGBW LED dimmer "ShenZhen HOMA1001", I implemented the modifications according to
[https://github.com/Koenkk/zigbee2mqtt/issues/3594#issuecomment-974919111](url)
Pairi…
-
### The problem
As requestedI am opening a new issue for this, but it seems to me that it could be related to #81018. I am using Home Assistant Yellow for a few months now in a new house, so no prior…
-
### What happened?
Hello, I just bought 2 [Sinopé SP2600ZB](https://www.zigbee2mqtt.io/devices/SP2600ZB.html) switches. I added them to my network and the exposed energy attributes is always null kWh…
-
### What happened?
I'm currently owning 3 new type of devices that I want to pair with zigbee2MQTT :
- Legrand green power switch blind control ref 600087L [manufacturer doc here (french)](https:/…
-
### PROBLEM DESCRIPTION
Hey! I have this latching [relay](https://amzn.eu/d/iqW41fq)
I have tasmota 12.4 and configured the esp pin as relay_bi because the relay is triggered by low level. But…
-
No new data from THR316D appears in HA after eWelink app is closed.
After eWelink app started - new data appears in HA as soon see changes in app.
THR316D added after upgrade to 2022.8.0, so no id…