-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Describe the bug
The m5stack board definitions are based on arduino-esp32 2.x but I want some newer wifi stuff so I tried building with the now upstream arduino-esp32 m5paper board target and i…
-
First of all, great THANK YOU for this useful library.
Please help to combine (in one sketch) two must-have libraries:
https://github.com/iotappstory/ESP-Library
and
https://github.com/s…
-
The code that was compiling yesterday (17/july/2023), stop compile today after I accept the upgrade of ESP32 version 2.0.
Please, see below the warning and errors I got when compiling for DOIT ESP32 …
-
My Bob (normal version) arrived today and I could not help but take it apart immediately (at least the front plate).
I'll share my findings here, because some of them are very relevant to the projec…
-
I've got an ESP32 with T-display. So I believe I've set everything up right, but maybe I'm missing a step. I got the right version of ESP32 board, I've added the -w and -zmuldefs to where they needed…
-
`Arduino: 1.8.5 (Linux), Board: "ESP32 Dev Module, QIO, 80MHz, 4MB (32Mb), 921600, None"
/usr/share/arduino/arduino-builder -dump-prefs -logger=machine -hardware /usr/share/arduino/hardware -hardwa…
-
Is it possible to make it working with ESPAsyncWebServer:
https://github.com/me-no-dev/ESPAsyncWebServer
-
### Board
Olimex ESP32-GATEWAY
### Device Description
Nothing, just SD card in slot.
Running on USB
### Hardware Configuration
Nothing special, just the Olimex settings
### Version
latest mast…
-
I´m using spiffs for serving the files over html.
if i try to open one html page i get a few files libraries but not all. on the files which i dont get ican see in the browser: net::ERR_CONNECTION_RE…