-
This does not work: rosrun camera_calibration cameracalibrator.py --size 10x7 --square 0.101 image:=/thermal_camera/thermal_img_mono
This works: rosrun camera_calibration cameracalibrator.py --siz…
-
Right now, GHEtool ignores the internal capacity of the borehole, by making use of the equivalent borehole thermal resistance. This short-term effects however, can play an important role in some cases…
-
You set up an automation including a controller with some set and locked drawers and a conduit/pipe/.. to extract stuff from the controller, but when you came back to check if things are going well yo…
-
### The problem
hello,
I'm running HAOS 13.1 on a NUC12 (X86-64), and I noticed that on reboots of core or host, the processor temperature spikes exactly every 5 minutes as shown here:
![imag…
-
It would be very useful to add a plot with the final spectrum (number of photons vs energy), and may be other plots:
![image](https://user-images.githubusercontent.com/502315/157480195-7c1b4af2-bd…
-
It would be nice to see more settings for thermal runaway. Specifically, I'd like to see the ability to disable the hotbed but continue the print in the case of hotbed thermal runaway, but I'm sure th…
-
From watching your code yesterday, the way to display the 64 values is challenging and likely not optimal.
It created a lot of group and then fill them.
AFAIK for working a lot with thermal display,…
-
#4732 # Description
When thermal error occurs with hot end such as Thermal runaway error message is displayed and alarm sounded.
you need to reset printer to resume.
Is it possible to also sav…
-
Hi! The Mavic 2 enterprise dual is supposed to support the resolution `336 x 256` but the enum `VideoResolution` doesn't contain that resolution and I can't find any thermal specific resolution setter…
-
```
To add these one way is to issue a IOCTL_THERMAL_QUERY_INFORMATION from your
driver (must be from Kernel mode) which will return a THERMAL_INFORMATION
structure (see the WDK .H files). To get th…