-
Sending this in not only to see if it can be fixed, but to save some poor soul from bashing their head against the wall.
I have a zako (HP) box, that had a legacy boot full rom from 2015 (did not …
-
Attempting to build from source using the steps as defined [here](https://github.com/96boards/documentation/wiki/HiKeyUEFI#source-code) is no longer sufficient. I have not quite made it so far to test…
-
I created a boot USB stick with the current archlinux ISO image, and it boots fine with qemu. However, I'd like to boot it natively from (U)EFI, which works fine with the raw image:
~~~
sudo qemu-sy…
-
BYT books are unable to access the eMMC from TianoCore without a wifi card plugged in. Appears to be an issue with PCI setup w/o wifi card then triggering a failure of the SMM commands between Coreboo…
-
Hi,
I installed Windows Embedded Standard 8 on Minnowboard Turbot with Unbranded Boot screens. I wanted to Replace the Custom Boot Logo, but unfortunately Windows Embedded Standard doesn't support …
-
@BrianRichardsonIntel from Intel STO Firmware pointed out that:
>they prefer to receive EDK II firmware issues in Bugzilla, especially if they are security related. Security issues are embargoed in o…
-
Hi,
I need to use TPM 2.0 from the bootloader on Minnowboard in order to hash the Linux kernel's image and extend it to the PCR register. Unfortunately, TrustedGRUB2 only supports TPM 1.2, and I co…
-
Hello,
I'm using the Minnowboard Turbot , I wanted use to change the **original Serial console** to the CPU comes with **High Speed UART1** or **High Speed UART2** . I guess it is to change the cod…
-
I have an Acer C720 which has a new ROM with coreboot + SeaBIOS + TianoCore DUET
I am able to EFI boot Xubuntu just fine on it, however, GalliumOS is missing grub2-efi and the EFI folder, which means…
-
Hi. I am going to buy Minnowboard as a stand to practice in UEFI developing. Is it usefull for that purpose? How i can debug my code? I know. that the board has JTAG interface. What debugging tool an…