-
It would be goot if dpkt would be pytest ready as tox has a bit bigger dependencies than pytes
```console
+ PYTHONPATH=/home/tkloczko/rpmbuild/BUILDROOT/python-dpkt-1.9.5-2.fc35.x86_64/usr/lib64/pyt…
-
As part of delivering VRRP keepalive support in https://github.com/airshipit/treasuremap/issues/94, the following packages are being updated/installed: bridge-utils, keepalived, ipset, ipvsadm. These …
eak13 updated
3 years ago
-
The configure script does check for c-ares, but the build needs it even if the library isn’t found.
https://github.com/FRRouting/frr/blob/9931db75f7730381ad4fba16efd39cbb67749470/configure.ac#L1611
…
-
failed to add master to cluster: failed to exec command: sudo env PATH=$PATH /bin/sh -c " --apiserver-advertise-address 192.168.0.5"
-
Build Oct 27:
frr# show run
Building configuration...
Current configuration:
!
frr version 8.2-dev-MyDebPkgVersion
frr defaults traditional
hostname frr
log syslog informational
no ipv6…
-
**Describe the bug**
I intend to install an SSL certificate generated with "Let's Encrypt" to be used on the captive portal and admin interface.
After carrying out the port-forworing of the ports (1…
-
**In raising this issue, I confirm the following:** `{please fill the checkboxes, e.g: [X]}`
- [X] I have read and understood the [contributors guide](https://github.com/pi-hole/pi-hole/blob/master…
-
**Describe the bug**
While "notify" script only appears in sync_group, keepalived still sends STOP to script. Which should not be possible according to documentation.
**To Reproduce**
Using confi…
-
**Describe the bug**
While it's obviously better to use custom chains for this (as one can control the exact moment of their traversal) - if keepalived is set to use standard chains - I noticed sligh…
-
keepalive and haproxy needs 'vrrp' protocol as per: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/load_balancer_administration/s1-lvs-connect-vsa.
The command is:
…