-
### Description
Per Issue usnistgov/REFPROP-wrappers#138, TBFLSHdll now returns upper and lower dual-roots at temperatures above and below Tcrit in REFPROP 10 by specifying kr = 1 or kr = 2. Howev…
-
Hi,
First thanks a lot for this good work !!
Would it be possible to add the control of heating/cooling ? At the moment we can only turn on of off completely the unit ?
Also is it normal that I…
-
Dear community,
I try to get and set values but I am unable to identify the correct adresses.
Requesting the type via telnet gives me : 204B. (Request via 00F8 / Protocol = P300)
After having d…
-
### Primary Contact
paula.fratantoni@noaa.gov
### Secondary Contact
_No response_
### Data Name (This will be the displayed title in Catalog)
Slopewater Proportions
### Indicator Nam…
-
Still depends on the design, but there should be some (interactive) charts to show the analysis. It's still open to what extend they should be interactive and how they should be customizible.
Note: M…
-
Hi!
First off thank you for your work!
So my Lydos has this mode called ECO which automatically controls temperature based on my consumption. It works like magic and almost always had more hot w…
reyo updated
8 months ago
-
Currently there is no simple way to create a domain (single column or otherwise) with a vertical pressure axis that begins at some lower surface pressure, e.g. column over high elevation.
-
@dextorious , have a look at this figures for SI and OpenMM units usage. I tested simulation of 216 particles of liquid argon for 15 ps with timestep at 0.5 fs without thermostating.
![rdf openmm…
-
Hi,
It would be great,if the 3 climate can control 3 output entities based on 3 ntc temperatures, 2sensor input is already availabe at the main panel as i saw.
-Genus One-
TA1; TA2(floor)
-
Hello,
Happy to get the first values now from my Vitodens 200 WB2C.
But it seems, that the address tables for 200 here on the side does not fit to my model.
The burner status, partymode, energy sav…