-
```
What steps will reproduce the problem?
1.All attempts to view mavlink data with MinimOSD as master Telem device after
fw r726 update fails to show live readings.
2.System works fine with old non …
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
I understand this forum is for bugs, but I don't know how else to ask
questions. I recently saw lady-ada's watcher and she used this man's XBee-API.
http://www.ladyada.net/media/wattcher/xbee.py…
-
Hey Guys,
I'd like to do a simple modification in the firmware to send the pwm values of the first 8 channels using MAVLink. The message RC_CHANNELS_RAW or similar will be used.
What would be your s…
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What steps will reproduce the problem?
I am using also the commands to send serial data to and from the xbee module in
my application. I added the following commands to your library (0x10+0x8B an…
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What version of the product are you using? On what operating system?
I am using version 360 on linux
Please provide any additional information below.
Do you plan to integrate series2 functions al…