-
Based on #15, try to think of a generic way to add camera functionality to this project.
Todos would be:
* add a new node type, because Cameras can't (or shouldn't) be hosted behind bridged access…
-
I've installed FPC/Lazarus with cross-compile from Windows to Linux.
I had an issue in one system that the binaries to cross-compiled could be wrong - cause the same sources do not have issues if com…
-
Я не знаю почему детект носкрипта не пашет, но мне пришлось изменит в скрипте дефолт на `nativeXHRworks = false` чтоб постинг под носкриптом заработал. На мой взгляд эту опцию нужно сделать так чтоб `…
-
Hello!
I have a strange problem. When i apply power to the d1 mini with the [8ch relay](https://www.amazon.com/Eight-Relay-Module-Optocoupler-Arduino/dp/B079DHY22L/ref=sr_1_4?ie=UTF8&qid=1523040710&s…
-
@hartytp here are new design files. Please have a look.
I'm pretty sure that all known issues were addressed.
[8CH_Ampli_Case.zip](https://github.com/sinara-hw/Booster/files/1968891/8CH_Ampli_Case.…
-
**Describe the bug**
RC2 feedforward component seems to be oscillating/not being continous. Measured FF frequency is 55Hz
`-Method.
This is used by httplib. Stacktrace:
``` pytho…
t-8ch updated
6 years ago
-
I've been trying to use the OTA Feature in the Espurna Firmware since a couple of days , but i havent been able to get it working yet.
Whenever i try the Arduino OTA , it uploads till 98% and then t…
-
Hi @xiongyihui
We're trying to get ReSpeaker Mic Array with 7 PDM Mics work on raspbian 9.
So, we installed fresh raspbian, plugged ReSpeaker.
```
pi@raspberrypi:~/mic_array $ arecord -l
*…
-
Feature #6103 does not seem to be working, as I am getting d-term spikes with 3.4 RC3 when Crossfire moves from RFMD2 (150hz) to RFMD1 (50hz).
I have rc_smoothing_type set to FILTER and input_hz …