-
Hello, thank you for your attention, this code is working great:
```
import Adafruit_ADS1x15
import time
import threading
from threading import Timer
import RPi.GPIO as GPIO
…
-
hi,
the Nunchuk demo.ino example code works with MEGA and UNO but **_not_** with Arduino Due (M3) and/or M4 core.
Here I get repetitive readings like
```
128,127,511,511,511,0,0
128,127,511,51…
-
I try to read 4 different analog values with an ads1115 but i cant get it to work
when i select more than two single ended channels i do get extra outputs in the symbol but there is no value attached…
-
hi,
can i suggest to add i2c pins to begin constructor? in that way, non standard controller are able to use the library without need to modify it.
some esp8266 are limited and have to reuse pin…
-
### Hardware:
Board: LOLIN32 V1.0.0
Core Installation version: 1.0.1
IDE name: Arduino IDE
Flash Frequency: 80MHz
PSRAM enabled: ?
Upload Spee…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
### BUG DESCRIPTION
I started to implement a Fingerprint Sensor which communicates via uart 57600baud. In Tasmota I selected SW serial on pin 4,5.
The Adafruit Fingerprint lib sends a ccommand to th…
-
The divider is known from the configuration. Therefore the value should be easily able to convert into a float voltage value.
-
Sensors:
- ADS1115
- Si7021
- MCP9808
- CCS811
- IR-LED HIR333C/H0
-
Hi,
I've been using Cloud aRest for a while, however I detected a problem.
After some Hours, device ID becomes unusable, by giving Error 504 like the following image:
![screenshot from 2017-05-14…