-
There are two types of calibrations: laboratory and onboard sensor. The onboard-sensor calibration process is performed at the sensor and all metadata/data will be captured in `YFactorCalibration` ob…
-
Hey all, figured I'd post a few photos of my setup. Came out really well, thanks for all the help from you guys!
![IMG_0552](https://user-images.githubusercontent.com/66571046/101272585-8c47cf00-37…
-
The communication between AhoyDTU and Hoymiles inverter is not stable. Sometimes everything ok for days, then not connection at all (RX no answer).
Status of NRF24L01+ is shown as connected. But da…
-
With current `master` on my setup there is crackling/distortion building up after a few seconds. The audio then stays in a listenable but distorted state after that. This is best discernable in speech…
-
### The problem
I have a Beelink MINI-S12 Pro Mini PC with Alder Lake-N (N95/N100) with the AX101 WiFi 6 & Bluetooth 5.2 module
This is not working in Home Assistant yet.
Home Assistant automat…
-
Hi,
I really enjoy playing with this bundle of feeders and the viewer. That's amazing.
I have a solid hardware setup, made of an AirNav usb stick and an antenna on the roof of my house. The software…
-
Thanks for your work. I'm not sure if this can help, since it's more about the uart communication rather than the Bluetooth one, but I founded some resources some time ago, and they might be handy.
h…
-
### What happened?
When communicating with a QS-Zigbee-CP03 curtain module I frequently get the following error message:
`error 2022-06-10 07:01:34: Publish 'set' 'state' to 'Store SZ Sued' failed: …
-
`div` is allowed where flow content is expected, but `p` expects only phrasing content.
Oxygen generates an error because the `div` is not allowed there, and Antenna House Formatter treats the `` a…
-
**Describe the bug**
Loop/RL lost a pod in action (first time we have seen this since we switched to omnipod
with loop in May 2019) and a new had to be activated. The issue seem similar to a PDM
…