-
the ping function works great but on local IP int ping does not work
i am using esp32 on Arduino ide v2 and esp32 barad library v3
-
Hi, IDE version 1.8.16 with Expressif Sytems (ESP32) version 2.0.14
no problem with ESP32 dev module, but with ESP32C3 I get this error message during compilation:
C:\Users\yakac\Documents\Arduin…
-
### Hardware
Arduino Nano Matter
### Core version
2.0.0
### Arduino IDE version
2.3.2
### Operating system
Windows 11
### Radio stack variant
Matter
### OpenThread Border Router device (if u…
-
### Describe the request
IDE 2.0 leaves a lot of directories files behind in (Windows system) `C:\Users\yourUsername\AppData\Local\Temp`. Request to collect them all in one dedicated Arduino direct…
-
I had problems following the [Beginner Setup Guide](https://github.com/HerrZatacke/wifi-gbp-emulator/blob/master/beginner_setup_guide.md) because _ESP8266 Sketch Data Upload_ would not show up in the …
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
Receive_Raw:32: error: 'CIRLremote' does not name a type
CIRLremote IRLremote;
^
/home/my_home/Arduino/libraries/IRLremote/examples/Receive_Raw/Receive_Raw.ino: In function 'void setup()':
Recei…
-
Hello, I followed the tutorial but when compiling under arduino IDE I encountered this error, does anyone have any ideas?
I try with Arduino IDE 2.3.2 & wemos d1 mini
`
D:\PATH\TO\Jarolift_MQTT-0…
-
Hi Dears,
since a couple of years I started working with ESP8266 (EPS-01 in particular).
I have a MQTT based application running without issues, using Arduino IDE to code and compile
I needed t…