-
I was able to compile the code (as-is) and upload it to my esp32, however, the unit fails to boot properly.
To be sure it was not my hardware, I programmed another esp32 I had on-hand and got the sam…
-
### The problem
When trying to retrieve content from a HTTPS site, http_request returns an error, either "error -4: not connected" or "error -5: connection lost". Non-secure HTTP sites work fine.
…
-
I put PNGdec in clockwise\components and add a CMakeLists.txt file as below
```cmake
cmake_minimum_required(VERSION 3.15)
if(ESP_PLATFORM)
# Build ArduinoJson as an ESP-IDF component
idf_co…
-
-
i'm making a python/flask example because i thought you might like to add it to your examples, and because python/flask is my goto stuff, but messages, strings or json, won't seem to work. while the e…
-
Hello,
I am facing an issue building [WiFiClock.ino](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/examples/SquareLine/v8/WiFiClock/WiFiClock.ino) for [CrowPanel 7.0"](https:/…
lboue updated
3 months ago
-
_@munzili started this #110 PR. I create this _issue_ to discuss here the long feature list he's proposing.
Feel free to contribute to the discussion but please have a look at the PR #110 first_
…
-
Not sure yet if this is a fluke or not:
Version 1.3.7:
```
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x400ef180 PS …
-
## Hello Max and The Bosch Research team
I am currently trying to Fuzz an Embedded Application on the STM32G474RE Nucleo Board - NUCLEO G474RE. I am going to quickly walk you through the steps I am…
-
Would it be possible to add Humidity control to the project as well? Could be done using something like a DHT22 sensor and using 2 more pins to control another pair of relays.