-
When running get_time() on an Arduino Nano all methods of the NaiveTime object (hour(), minute(), second()) return 1.
Calling .get_hours(), get_minutes() and get_seconds() returns the correct value…
-
```
What steps will reproduce the problem?
1.Attach TTL Adapter
2.Load Arduino 1.6.1
3.Load any ino - file
4. try uploading it
What is the exact brand and model of hardware you´r using?
Hardware Feat…
-
-
I am using RFM95W module along with ATMega328p as an IoT node. I have a RAK2245 based gateway that is continuously sending packets at 923.3 and SF12. Below is the log output. I am dumping RSSI when ev…
-
I have been able to use the current board definitions, but I find myself wanting to upload via an external programmer such as Arduino as ISP. I can put some time into it for development, but I have n…
-
I'm not really sure what's the problem here. I thought I just need to burn my pro micro with optiboot bootloader for it to work. But it isn't.
So I've tried attaching an Arduino nano atmega328p wi…
-
```
What steps will reproduce the problem?
1.Attach TTL Adapter
2.Load Arduino 1.6.1
3.Load any ino - file
4. try uploading it
What is the exact brand and model of hardware you´r using?
Hardware Feat…
-
Use qemu 5.2.0 or later
https://www.qemu.org/
Install ninja
```
sudo apt install ninja-build
```
```
mkdir build_qemu_5.2.0
cd build_qemu_5.2.0
../configure --prefix=$HOME/other/install…
-
Hi,
I have RFM69CW 868MHz modules. Trying them with unchanged "MinimalInterruptUno" example works fine. But after changing frequency to 868MHz the example stops working.
```
rfm.setFrequency((u…
-
Hey! ^^
We want to control the servo SG90 with an Arduino UNO using Rust. We made this work, however not as precisely as we would like and were able to achieve with C++ (1 degree precision).
Setti…