-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://arduin…
-
Hi, I'm using the MiniCore library to test a 16MHz crystal (with caps) connected to an ATMEGA8 chip. I simply chose the Blink example and set the desired output pin. I'm creating HEX files and USBa…
-
Hello,
I just installed MiniCore into the Arduino IDE and as soon as I attempt to compile I get this error message:
Compiling sketch...
"{runtime.tools.avr-gcc.path}/bin/avr-g++" -c -g -Os -Wall …
-
Hi,
I have a Drevo Gramr 84 key keyboard which I would like to modify. In particular I want to replace the4 PAUSE key with INSERT key.
I know that Drevo Gramr MCU is some weird stuff (see https:…
-
I plugged in my Atmega8A into my arduino uno board. When I tried to burn the bootloader, I encountered the error
> avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http:…
-
In order to solve or better to detour issue #157 I tried to compile myself bootloaders. In Linux (with installed IDE 1.8.9 file bootloaders/optiboot_flash/Makefile has incorrect access rights - should…
-
In i2c.c there's a macro which tells if the MCU is supported.
Simple Atmega8 has the same registers so it works flawlesly, but compilation fails due to this check.
-
Settings:
* Board: ATmega8
* Clock: 16mhz external
* BOD 2.7V
* LTO Disabled
* Bootloader: Yes (UART0)
* Arduino AVR boards package is installed (1.8.1)
* Arduino 1.8.10
The value of PB0 see…
-
Hello
I did a mod for `optiboot_flash.c`
After this, i tried to compile on debian stretch with this command
`make -e TOOLROOT=/home/pi/arduino-nightly/hardware/tools/avr`
But the script fails:
…
-
When I copy collectord to a new debian 9 container (it was compiled in another one of the same image on the same machine), it does not execute, saying file not found:
```
root@collectord1:/usr/loc…