-
HI John,
I noticed random crashes of ebusd-esp. So far one that I can reproduce is when I restart the wifi access point or wifi is down for any reason and then back again, ebusd-esp will not recon…
-
Beim Aktualisieren von Loxberry auf das neueste Release bekomme ich einen Error mit ErrorCode 2, während der Installation des Kernels bzw. der Firmware.
Hier der Update-Log: ['20190614_094305_572_u…
-
Hi,
I‘ve little problem with my ebus configuration and i cannot figure out where the problem is. This is the error i get:
Invalid config for [ebusd]: value is not allowed @ data['ebusd']['monito…
-
I'd like to put the logging options (--log) into /etc/default/ebusd but as soon as I do that ebusd won't start anymore. I tried:
```
EBUSD_OPTS="--scanconfig -d /dev/ttyEBUS -c /etc/ebusd --log='a…
-
Hi All,
I have a problem with reading data from my Vaillant boiler. I receive following readout from ebusd log:
```
2019-04-18 20:03:20.965 [main notice] ebusd 3.3.v3.3 started with auto scan
20…
-
Hi,
I have the following issue using ebusd and MQTT.
I'm currently using this configuration:
`EBUSD_OPTS="-d 192.168.1.23:8889 -l /var/log/ebusd.log --loglevel=error --latency=50000 --scanconfig --…
-
I realised that a ran out of space on my raspbery pi. After analysis I found the reason.
ebusd was generating sub-ms entries in the log file:
```
2019-02-10 16:30:43.962 [mqtt error] communication …
-
Checking of matching of the incoming mqtt payload type (e.g. number/string) is done prior to transformation execution
Channel:
```
Type number : ventStep0 "Vent Step 1 Value" [ stateTopic="ebusd/…
-
Using OrangePi Zero + PL2303 USB cable with armbian OS.
Fetched from git and compiled successfully. But can't make it work.
Boiler is : Vaillant turboMAX plus 800
`ebusd --scanconfig=full -f …
-
I would like read an example of the use of the /set in the MQTT, since I can not modify the value and I only get errors,
If I use the command by console, it works correctly:
```
user@server:# e…