-
Basically as the title says, I can't seem to find any CAD model that can be used for designing enclosures, etc. for the mainboard. I've been using the SKR cad model for the moment since it has the sam…
-
My configuration is using LSI-2011-8i with broadwellnk-7.1.0-42661. everything seems working expect the drive number in Synology does not match the physical location. Is there a way to re-mapping it?
…
-
# driver
- [ ] enclosure
- [ ] GPS needs to poll at the max hardware rate, ideally at least 10Hz
- [ ] receive messages from pit
- [ ] "pit mode" next lap, or prev lap (comes in before). "time si…
-
Podcasts only seem to be read via text to speech service. Simply adding to playlist from valid feed (even with podcast view) only results in the TTS. Is this a feature or bug? My hope was to hear th…
-
Greetings,
I finished the installation of the ELS on my SB 10k Lathe and is working properly with just one issue and one questionable/possible issue.
The display panel, when within a few inches …
-
Hi, after updating the plugin to 1.1.5.3 other plugins using bcm mode like enclosure plugin stop working, disabling the smart filament sensor resolves the issue for now. Any suggestions? ty
-
I fenced in a fairly large area, but the game seems to have trouble recognizing it as an exhibit. The fences go over a variety of terrain, and I have two bridges going over the prospective exhibit. Wh…
-
I've bought a used iSight & have the Raspberry pi lying around, but I was curious if anyone has tried to print the enclosure with an FDM printer?
With a 0.2mm nozzle I'd think it would likely be pos…
-
## CVE-2020-28469 - Medium Severity Vulnerability
Vulnerable Library - glob-parent-3.1.0.tgz
Strips glob magic from a string to provide the parent directory path
Library home page: https://registry.…
-
`momepy.CellAlignment` expects the left and right GeoDataFrames (containing buildings and tessellation cells) to have the same number of elements, ie each building corresponds to one cell (which is th…