-
Thanks _so much_ for your hard work - this is turning into a really great Hacker'Z'app. Seriously, thank you again. The output etc below was generated using the Harmonix Guitar Hero Drum Kit (Model…
-
Dear OnsenUI Team,
the access to your website and demos from europe is extremly slow. Your servers are located in JP and my traceroute from germany is like 22 routes till finish. This makes it extrem…
-
I have a new raspberry pi 3 b+, connected via ethernet cable to router, and only 1 usb dongle attached - a 4G USB Aircard. When trying to execute uhubctl command via SSH, there are many errors. I can'…
-
Not sure if this has been requested yet, but I was thinking we could add larger curved.
Now as for "making curves" that would be covered by having a two tracks without placing the last track in the c…
-
Hi,
I've done some testing with some hubs that were laying around at my place and for me, the D-LINK DUB H7 in the black housing is working fine.
uhubctl detects it as "smart hub". I build a little …
-
Anker 14-port (13 data ports) hub appears to work although it can be stubborn.
https://www.amazon.com/Anker-14-Port-Aluminum-Transfer-Charging/dp/B00GSLMTQ8/
Serial Number: 22U2FN2H
```
./uhub…
-
When reading large packets from a Serial -> USB converter I can observe corrupted packages, with invalid or missing data.
**This behaviour is only exibited using the raspberry pi linux kernel.**
…
-
[Krikzz has announced](https://twitter.com/krikzz/status/1029866104259321856) that the next Everdrive N8 firmware will add support for 50 new mappers (27, 35, 37, 44, 45, 49, 50, 51, 52, 56, 60, 103, …
-
On MacOS Sierra 10.12.4 (16E195), uhubctl prints identical hub id `64-1` for 2 different hubs:
```
Current status for hub 64-1, vendor 05ac:1006, 3 ports
Port 1: 0100 power
Port 2: 0303 lows…
-
Using a custom Rasberry Pi board with LAN9512 device, As per the reference design we have used a MIC2026 device to gate the +5V power feed to the USB ports, which is controlled by the PRTCTL2/3 lines…