-
### Prerequisites
* [x] Model name of your Devices: TuYa TS0601
* [x] Output from Home Assistant Developer Tools state e.g.
* [x] Output from Home Assistant Device Diagnostic from BT
Dev…
-
Would be handy to add / remove member (entity) IDs to an Identity group without having to perform all the read and update calls explicitly. Consider this an analog to the `patch()` method in the KvV2…
-
### Prerequisites
* [ ] Model name of your Devices
* [ ] Output from Home Assistant Developer Tools state e.g.
* [ ] Output from Home Assistant Device Diagnostic from BT
`{
"home_assistant"…
-
### Prerequisites
* [x] Model name of your Devices: TS0601 (_TZE200_cpmgn2cf)
* [x] Output from Home Assistant Developer Tools state e.g.
Output
```json
hvac_modes: heat, off
min_temp: 5…
-
Hi
I have a thermostat that is setup by MQTT. It has state AUTO, DAY, NIGHT and OFF. State Auto is ok as AUTO, but state DAY in my thermostat is set as HEAT and NIGHT as COOL. OFF is also as OFF. In…
-
My Orcon SmartComfort zone valve (connected to the FAN, acts like a fan, can pair with remotes etc, so should be and is a `FAN` entity) sends a pair of 31D9 messages every 15 minutes:
```
2023-03-…
-
To visualize the VSS data, it would be nice to have an integration with Prometheus.
Since databroker already is a gRPC server, it may be easy to add this feature, as a Prometheus exporter is just a…
-
Yiling,
PS my mail titled: Learning with priors (params from other regions)
This code should help you get started. With similar concepts, you would need to implement the basic transformation stra…
-
## The problem
I have a Magnum MRC electric floor heating thermostat which uses the Tuya platform.
Configuring the thermostat using Local Tuya does not make it fully functional. It would be gr…
-
Hey having a bit of a issue with using the Device parameters (configuration.yaml) function of this to try to add a temperature readout to my AC
`tuya_custom:
devices_config:
- device_name: …