-
The julia user @sjdaines reported this segmentation fault (https://github.com/Alexander-Barth/NCDatasets.jl/issues/187 ), when repeatedly open a NetCDF 4 file, reading a vector and closing the file.…
-
**Describe the bug**
I config two machine as router with frr which have same config expect own subnet and router-id, and I use
```
neighbor RACK peer-group
neighbor RACK remote-as external
ne…
-
we are facing problems with DPM running on top of XRootD 5.4.3 from EPEL, because transfers with xroot protocol gets stuck with gfal2. Transfers with simple xrdcopy recovers but only after client dete…
vokac updated
2 years ago
-
## Environment
Module or chip used: ESP32-WROOM-32
IDF version: v4.0.0 Release
Build System: CMake
Compiler version SysGcc 8.2.0
Operating System: Windows
(Windows only…
-
I ran into a weird issue with MSDP where frr is dropping an incoming connection from a configured MSDP peer, claiming it's not actually configured. This is likely difficult to reproduce and will proba…
-
Hi,
I have a problem with running the AzimuthalIntegration in independent processes (or even in just 1 process) with OpenCL in Linux.
A code example is given below. If I run it on Windows, it wor…
-
- Module or chip used: ESP32-WROVER-B
- IDF version: v4.2-dev-1126-gd85d3d969
- Build System: Make
- Compiler version : xtensa-esp32-elf-gcc (crosstool-NG esp-2020r2) 8.2.0
- Operating Syst…
wgcod updated
2 years ago
-
On Linux, when I call `nc_def_var_fletcher32(ncid, varid, NC_NOCHECKSUM)`, a subsequent call to `nc_inq_var_fletcher32` returns `NC_FLETCHER32` . Apparently check summing is activated. Under NetCDF …
-
**Describe the bug**
A new NetCDF_jll release was made a few days ago. It appears that this doesn't communicate well with the HDF5 dependency.
This was introduced in https://github.com/JuliaPack…
-
#### Description
On making port `eth0` down the default route is removed from `APP_DB`.
#### Steps to reproduce the issue:
1. Learn the default route via BGP.
2. Confirm the default r…