-
I successfully installed Octopi-TFT.
I am using waveshare TFT display with its driver
`git clone https://github.com/waveshare/LCD-show.git`
- After checking I found out display is not calibrated, s…
-
How can I get the TFT35-SPI V1.0 to work with klipper on SKR2 in the B1 SE PLUS printer?
![BTT-35-TFTSPI](https://user-images.githubusercontent.com/5417682/203929704-e542c189-995f-428c-9452-d7857e6…
-
Hi Marco, I tried to modify your excellent project to work with "LCD Keypad Shield" but without success.
The part with the parallel LCD display works correctly, but the control of the analog keys is …
-
Add I2C support for LCD 16x2/20x4 and/or OLED Display with I2C Modules as suggested by the OpenTherm Gateway Manual.
- kent Display 240x160 (sparkfun lcd-09560)
note prototype device…
-
```
Originally entered by mem:
List of possible target controllers:
- nokia 6610 128x128 color (sparkfun lcd-00569, lcd08600)
- kent Display 240x160 (sparkfun lcd-09560)
note prototype device…
-
```
Originally entered by mem:
List of possible target controllers:
- nokia 6610 128x128 color (sparkfun lcd-00569, lcd08600)
- kent Display 240x160 (sparkfun lcd-09560)
note prototype device…
-
Hi there, I own one of these LCDs https://www.crystalfontz.com/products/document/296/CFAG128128B-TMI-VZ_Data_Sheet_Preliminary_2012-04-17.pdf.
I created the following to support the LCD to work with…
-
During Setup it would be very helpfull to auto-detect if a LCD screen is connected to the RaspiBlitz or not .. for example see: #860
Maybe a python script can test thru the GPIO library to check if…
-
This is what I know still has an issue.
* ST display drivers have issue with the rotation being out of sorts. This is causing the text to display backwards. I have to do a little bit more research …