-
Hello, I am new to the Arduino world and am attempting a project for kitchen lighting. I have 261 WS2128b's wired up with a 5v 12amp power supply, injecting power every few feet of strips. Using the b…
-
As title says, is there a way to use an image to set the static color of the lights?
Right now, most I can do is set the Mode to static which will set 1 color across the whole strip. I would like t…
-
Hello everyone,
I discover this fork of Prismatik a few days ago and build a working system with WS2812B (60 leds/m) on macOS.
Then, i decided to buy the same leds but with 144 leds/m, install e…
-
For years I've had problems with running WS2812 strips from ESP32/8266 but had no problems running from a nano or other arduino.
I'd always assumed it was the voltage difference but despite trying nu…
-
I've been using the `set_single_persistent_default_layer` function to switch base layers but the changes aren't persisted to EEPROM. I've also wired up a small LED strip and my understanding is that c…
ameyp updated
3 years ago
-
Light deduction system is the system which can be react to the object(human body) near it. This system can can used in several places (Entertainment, security, decorations, etc)
Tools and materials:-…
-
Noticed a weird uploader behaviour..
second line in following lua script (even when commented) breaks the upload process:
```
DHT_PIN = 7
-- if current_buffer_length > 2 and is_valid_sequence == f…
-
**Describe The Bug:**
I have four identical Athom mini USB-C controllers, each connected to the same 60-led strip. If one is unplugged, or unavailable on wifi, the next controller listed in the confi…
-
Shelly Plus Plug S has four WS2812 LEDs in the outer ring.
This template for both LED Strings (each with two WS2812) on GPIO 25 (left half) and 26 Right half) works for me:
` {"NAME":"Shelly Plus Pl…
-
On slackware64-current with a USB bluetooth dongle. I have been using the trionesControl python module to control an LED strip. When running from a terminal everything runs and exits fine. But I found…