-
### Description
I wanted the Z axis endstop on my SKR1.3 Creator Pro to be on an interrupt. There was only one pin suitable for endstop interrupt. To get around this I just commented out the code i…
-
### Description
I am working on the firmware for the PowerWASP 3D printer that uses an ATmega2560 on its mainboard.
While using a [slightly fixed version](https://www.visualmicro.com/forums/YaBB.p…
-
[Archive.zip](https://github.com/MarlinFirmware/Marlin/files/1975200/Archive.zip)
### Description
On MARLIN 2.0 i can't activate D6 et D5 for layer Fan et Extruder Fan
I have a RE-ARM With …
-
pinmapping.h was removed and so it fails trying to check if a pin is interrupt capable.
I can of course comment out the checks but new users might have an issue. Unless I'm the only user :)
I know…
-
### Description
Bug fix 2.0 wont build on Macs due to an error with toolchain-gccarmnoneeabi compatibility.
Issue can be rectified by editing ~/.platformio/platforms/nxplpc-arduino-lpc176x/platfo…
-
### Description
Similar to #9948
Advanced pause on MKS SBase using LPC1768 generates an error when serial port 2 is defined.
When serial port 2 is commented out it will compile with no errors …
-
Hey,
i dont know where my config is wrong or if it is a bug.
Hardware: skr1.3, genuine bltouch3.1, tmc2209 sensorless homing for y,x ,2208 with optical
endstops for dual z and e.
Software: la…
-
Bug Description
Repeatedly getting error Marlin\src\HAL\HAL_LPC1768\../../core/../inc/../pins/sanguino/pins_SANGUINOLOLU_11.h:56:4: error: #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'A…
-
So i noticed in the readme file for Marlin 2.0 that one of the current HAL's was for Re-arm .. Then afer googling the matter for a day or two , i saw some people say that there has been a successfull …
-
### Description
The neopixel library isn't implemented for the LPC176X, in my case the Azteeg X5 GT. I have found a NeoPixel library that supports the LPC1768 here: https://os.mbed.com/users/JacobBra…