-
Hi,
Was wondering if anyone has tried this chip? I have added a line to `TommyPROM.ino`
```
PromDevice28C prom(2 * 1024L, 0, 10, true); // 28C16 with no page writes
```
However I'm not havi…
-
How about working on some embedded dev boards and building up some driver support crates? UARTs, SPI, PWM, that sort of thing. I'm thinking things along the line of japaric's [F3](https://github.com/j…
-
Hi Tom, I wonder if you can offer any advice on my issue.
I'm on a Mac. I have installed lrzsz using Brew. I then use the screen command to connect to the TommyPROM. Press w and enter, then press c…
-
Hi all. Both my DCS8100LH upgraded their firmware last night from 2.01 to 2.07. I had always switched auto upgrade off, but after a reboot, they must have switched on again. Anyway, the long and the s…
-
Task is to integrate theCore with [KE02 MCUs](http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/e-series-5v-robust-m0-plus-m4/kinetis-ke02-20-mhz-entry-l…
-
**Describe the issue**
A clear and concise description of the symptoms
**To Reproduce**
Steps to reproduce the behavior:
**Expected behavior**
A clear and concise description of what you expe…
-
Currently the CDC ACM UART of the debug probe doesn't support transmitting a break signal. eg press `CTRL-A` `F` in minicom and observe that nothing happens.
Having support for break transmission w…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have self-compiled Marlin-FW 2.1.2.1 with default configuration. I have only #define SERIAL…
-
Currently, the demo version is not working for the board `nrf7002dk_nrf5340_cpuapp` at version 23.11.
Steps to reproduce:
``` shell
git clone git@github.com:AVSystem/Anjay-zephyr-client.git
cd A…
-
### Device
APU3
### Dasharo version
0.9.0
### Affected component(s) or functionality
_No response_
### Brief summary
Ubuntu 22.04.4 randomly reboots during booting
### How reproducible
_No re…