-
### Basic Infos
#### Hardware
Hardware: ArduCam ESP8266 UNO V2 ?ESP-12? yes
Core Version: V2
### Description
Problem description - power lights get high and low at all time this l…
-
I'm getting incorrect readings with the SDS011 and NodeMCU v3 running NRZ-2020-133:
SDS011 | PM2.5 | 230.8 µg/m³
SDS011 | PM10 | 248.2 µg/m³
This is a brand new setup btw. I've tested the SDS01…
-
I found this board and it would be great to make the software run on it.I don't know what setup I need to do in order for it to run.Hope the devs can help me out.Thank you.
This is the board:
US …
ghost updated
4 years ago
-
I'm powering my unit using solar and a massive battery and for the most part it works pretty well but if the battery runs low even for a few minutes and the Nodemcu restarts it's stuck in a state in w…
-
I just started playing around with this on an ESP-01 and an ESP-03 successfully. I want to try dropping it on one of my free 12f's this weekend. But I also have some dev-board type esp-12 modules such…
-
W ustawieniach urządzenia zauważyłem dziwne linie zamiast dodatkowych uprawnień oraz przycisku 'Zapisz'.
 and configure things.
My problems are as follows:
1) Some…
-
Hello, Great project!!
I cannot seem to get MQTT Remote Control to work. I'm able to get it to attach to my MQTT broker and see the logging in topics as expected, both when set as Individual Topic or…
-
I did a put of an 80k text file (to an ESP8266), and I thought mos.exe hung. Then I did a get and timed it: the transfer took more than a minute. That's just over 1kB/s, slower than dialup, should be …
-
Could you explain to me why you are using 2 pins on the nodemcu to drive DE and RE on the max485.?
In the program they are both held high or low together so why not just tie them together?