-
### Describe the problem you are having
seeing the ram usage (via glances) for frigate is topping out at (+/-)80% of the total system ram.
if i restart the container, i can watch it slowly climb u…
-
### Describe the problem you are having
My frigate instance does not seem to be utilizing the GPU for acceleration. No version of the config (preset-nvida-h264,preset-nvidia-h265) starts a process in…
-
### Feedback
I have the following cameras: RLC-842A, RLC-822A and RLC-1224A. My HA server ver 2023.08.4 uses a HTTPS address (with a certificate) and the motion detection (and all other sensors) wor…
-
### Describe the problem you are having
i would like to configure my container on my unraid system so that it only uses the second gpu. unfortunately, it always accesses the first gpu. of course, i…
cm86 updated
9 months ago
-
I have an issue with my Reolink E1 Zoom, where it only reports the first motion once the docker container starts, any subsequent movement is not reported. MQTT shows all of the Reolink features and I…
-
### Describe the problem you are having
I'm looking for any help to stop ffmpeg from crashing and to improve general performance. I've been through the docs double digit times but feel like I'm not …
-
**Describe the bug**
When I try to launch Neolink with a cellular camera config, I keep getting _Registration with reolink servers failed_.
**Config**
```
bind = "0.0.0.0"
[[cameras]]
name =…
-
### Describe the problem you are having
Live view latency mostly apparent on Video Doorbell and only on my mobile device. It will skip seconds often and freeze up. Tried to set live view substream …
-
Connection using 4G cell phone camera, stopped working, it seems that Reolink servers are blocking access.
Using the Reolink Go PT Plus Camera.
neolink, stopped working, even using the latest ve…
-
### The problem
I am getting the following message when trying to configure my Reolink E1 Indoor camera. I already have a Reolink Doorbell and E1 Outdoor configured.
Error Message:
See the [t…