-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When defining DEFAULT_AXIS_STEPS_PER_UNIT to correct values Extruder wont retract / reverse. …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
After Printing, the display dont show correkt on stop/abort on ender 3v2 M2.0.9.3
### Bug Ti…
-
Hi,
I've downloaded the latest version of Marlin and in configuration.h there isn't a "board definition" for that board (Megatronics v3.0).
Now my printer is runnig with a marlin v1 where the megatro…
-
### Description of the bug
Seit dem Update von PruraSlicer-2.4.1 auf PruraSlicer-2.4.2 druckt der Drucker extrem langsam. Ca. 25%
So wie ich sehen konnte, hat sich in den Einstellungen nichts geän…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
M218 is not working as expected, a Z offset of 2 is almost the offset I need, I get the nozzle close…
-
(Posted first in Discussions but no reply)
I replaced my hotend as the old one was faulty, I got a 12v 40w one but now it heats, but not hot enough. It gets to about 150deg and then stops, after a …
-
**Is your feature request related to a problem? Please describe.**
The "Left" time calculation is based on total print time reported by the printer and is not accurate, especially in the early minute…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Hi,
it looks like there is a problem with the retract in Marlin 2.0.9.3. The printer produ…
-
### Description
For most of the host prompts the wording is included in the C code and for a few of the prompts wording is linked to the language files. e.g. MSG_REHEATING, MSG_NOZZLE_PARKED, MSG_H…
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
Hey, so I'm trying to get my cr touch to work with my ender 3 with a skr mini v3 board. The config t…