-
I've built for `BOARD=GENERIC_S3_SPIRAM` with the following `sdkconfig.usb`
```
CONFIG_USB_ENABLED=n
CONFIG_USB_CDC_ENABLED=n
```
Firmware attached. This also has the fix from #11254 built-in…
-
After merge main branch which fix issue with #99, app can not run, auto reboot.
hardware: ESP32-C3
IDF version: V5.2.2 and V5.3
IDE: VS code
what i did:
1.Write cert int to ESP32 by:
python ma…
-
Thank you for your excellent work.
RMT has demonstrated remarkable performance on ImageNet-1K. For instance, the RMT-S model achieves an outstanding top-1 accuracy of 84.1 at a complexity of 27M&4.…
-
### The problem
I'm trying out the M5Stack IR receiver/transmitter combo. Setting up the receiver to dump all received messages fails to set up the RMT peripheral. I have a hunch it's related to th…
-
I have an impossible problem with an RMT function. Perhaps you have an idea that can help me.
First I used the "OneWire" library for my DS1820. I currently have 4 sensors connected.
In my project I …
-
I get the following error when trying to upload to an esp32 c6 dev board. I think this might be because the c6 is not currently supported?
.../FastLED/src/platforms/esp/32/clockless_rmt_esp32.cp…
-
### The problem
The response at first is perfect I can call the wake word and is very quick to respond. However if I don't use it for a while, and I have done some testing and it's about 15 minutes…
-
Hello Darryl,
i admit there are a lot of libraries (based on PWMs) around but i truly believe that an hardware solution is somewhat the best approach.
I started looking into IR due to the fact that …
maxdd updated
5 years ago
-
### Board
SparkFun ESP32 Thing
### Device Description
The SparkFun ESP32 Thing is a 3rd Party Board based on the ESP32-D0WDQ6-V3 chip with a 26MHz XTAL
https://www.sparkfun.com/products/13907
…
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
[CNC_xPRO_V5_XYYZ_NC.txt](https://github.com/bdring/Grbl_Esp32/files/11178823/CNC_xPRO_V5_XYYZ_NC.tx…