-
如果是三星S22这样的没有SD卡的设备,如果插入OTG的U盘,进入/mnt/media_rw,进入U盘目录下的备份脚本目录,备份应用会提示U盘格式不是exfat,从而不能备份,但是U盘确实是exfat格式了,目前的临时解决办法,只有把备份脚本放内置储存,并且修改backup_settings.conf下的#自定義備份目錄輸出位置 (忽略為空將默認腳本路徑中)
Output_path= 外置储存目…
-
**Describe the bug**
When I first installed I believe RC2 or 3 but for sure with Nightly build and started testing with the first versions of the
Teensy installs, I found I could no longer build som…
KurtE updated
2 years ago
-
Hey Phil,
Firstly, again, massive compliments for this excellent library. Have had many fun making prototypes with it so far. However now I'm running into a challenge.
Ideally I would want my Au…
-
Hi,
I am using the latest version of the Arduino IDE v1 and I recently installed and tested the library v2.1.2. However I met the following compile error with example QuickStart.ino for an Arduino Un…
-
Hi there,
I have been pouring over your code over the last week, and am curious.
Do you have a recommendation on when to use File vs. SdFile ?
eg.
`SdFat sd ;`
`File file ;`
` // etc.…
-
Dear owner,
Thank you very much for this usefull MIDI application.
I an trying to adapt this onto ESP32 after successful test working on ArduinoNano, but I have an ERR
at openning SD card.
Is ther…
-
Hello,
I would have a question.
Do you have some example code for SdFat library (https://github.com/greiman/SdFat)?
I would like to use your library, but on STM32, I can't use the standard SD libra…
-
I'm tring to save a file inside the SD in marlin, and i was searching about SdFat and Sd2Card. And then i saw this method insed marlin:
```
void CardReader::write_command(char *buf) {
char* begin =…
-
**Issue by [Wackerbarth](https://github.com/Wackerbarth)**
_Saturday Feb 06, 2016 at 12:10 GMT_
_Originally opened as https://github.com/MarlinFirmware/MarlinDev/issues/344_
---
The SD Fat library …
-
reading that you did fix the compile problem with ESPCore >=2.0.1 in this [commit](https://github.com/fdivitto/FabGL/commit/c096d0f717600d597428922ce0bb08f9f73c4634)
I did try to compile my RunCPM-Fa…