-
First, it's recognized as usual HDMI-1, but after a while, faster, if the screen goes into powersave, the external screen vanishes from xrandr output, but mostly stays sort of operational.
I mainl…
-
I apologize if this isn't the correct place to ask this - new to github
Would one be able to use a thermocouple through the adafruit board wired this same way?
Does PT100- analog = a thermocoupl…
-
"Place Eddy Approx. 20mm above the bed.
From Mainsail or Fluidd run command LDC_CALIBRATE_DRIVE_CURRENT CHIP=btt_eddy
Type SAVE_CONFIG to save the drive currant to your config"
This did not work …
-
Send: G29
Recv: Echo: 0.240 0.210 -0.023 -0.130 -0.237 -0.320 -0.370 -0.300 0.790
Recv: Echo: -0.037 0.100 0.077 0.440 0.397 0.297 0.237 0.513 0.667
Recv: Echo: -0.153 -0.097 0.383 -0.033 -0.400 -0.70…
-
There are cases where if we add a bogus TracingPolicy , the operation will continue, creating the generic kprobe resources where the main related hook will fail at BPF attach point, but other related …
-
### Description of the bug
Current slicer profiles for MK4 + MMU3 (1.13.2) offer support for 0.4mm nozzle only. We need more nozzle sizes supported
### Project file & How to reproduce
Selection "C…
-
I uncommented the section [bl touch] but klipper asks me to specify
control pin and sensor pin of the bl touch
and after I have this error:
"gcode command QUERY_PROBE already registered"
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
WITH SYNTAX G2/G3 X Y Z I J F THE AXIS DO MOVE BUT VERY SLOWLY
This potential bug was first repor…
-
Originally reported by https://github.com/coffeecrisp
OS: Kubuntu 22.04
Version: 0.6-alpha
In Devices -> Memory SPD, it says "Please load the eeprom module to obtain information about memory SP…
-
cannot define eddy coil while using bique microprobe .
printer cfg looks like this
[probe_eddy_current eddy]
sensor_type: ldc1612
z_offset: 1.5
#i2c_address:
i2c_mcu: EBBCan # This value is …
kodil updated
1 month ago