-
### What happened?
TuYa TS0012 Smart light switch - 2 gang
When I click on one of the two switches on the dashboard (State Left or State Right) that refer to that switch, both loads turn on, not jus…
-
## What happened
https://github.com/Koenkk/zigbee2mqtt/issues/4468
This is an issue with the above equipment.
When a button is pressed in succession, a delay occurs from the second button…
-
### What happened?
I have 124 devices in my zigbee network
Routers
74 lights
21 switch - all Aqara D1
1 Ikea repeater as router
Remaining are sensors
They are quite densely deployed in …
-
### System Health details
## System Information
version | core-2023.3.3
-- | --
installation_type | Home Assistant OS
dev | false
hassio | true
docker | true
user | root
virtualenv | false
…
-
how to add "now opening" and "now closing"(like garage door) indicators to the lock code for Sonoff SV. Successful open and close signals would come in through GPIOs 4 and 14 just like a garage door w…
-
Hi All,
I have some problems with MQTT lights and Home Assistant when MQTT Broker is for a moment offline and come online again.
When this happen some lights went on and others keep off. I really …
-
### What happened?
All 3 switches AQARA QBKG24LM failed to interview.
They had no problems befoare, but after installing a new system they all failed.
There are no problems with all other 64 device…
-
After scanning the network for tasmota devices some devices are double in the list. in my case all of them are powerplugs wich come with rgb-led and power monitoring.
rescanning (even if deleted ma…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
when used in shutter button mode, all other group topic shutters are started. local shutter is stopped right awa…
-
### The problem
I installed a Tuya TS0012 wall switch that has two switches integrated (switch1 and switch2).
When I operate hardware switch, I can switch switch1 and switch2 independently.
When I …