-
I have a Pimoroni VEML6076 UV sensor breakout that I want to use in Micro Python on a Pi Pico. It's discontinued so there is no Pimoroni Micro Python library. I have found one that does work in Micro …
-
I'm not sure if this is the right place, but I'm working on the ESP channel, and compiling 0.20.2 doesn't work, while 0.19.1 seems to be fine.
Let me know if there is anything else I can do to diag…
-
Hi,
I have developed a server web page with esp32 (esp idf V4.3 ) . we can get this page with SoftAP, Wifi STA or Ehernet connexion.
With Ethernet connexion its work well without any error.…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://docs.lvgl.io/)
- [x] Update lvgl to the latest version
- [ ] Reproduce the issue i…
-
Adafruit 1.14" screen doesn't enable correct offsets in ST7789_Rotation.h when width and height set to 135x240. Simple fix in ST7789_Defines.h required to set CGRAM_OFFSET by checking for 135 width an…
-
Hi!
I have an **ILI9486** 4" touch LCD, [this type](http://www.lcdwiki.com/4.0inch_SPI_Module_ILI9486)
![image](https://user-images.githubusercontent.com/43829586/166289799-3c4c9b33-1f96-457f-b7…
-
Hi,
I have been trying to run this demo on an 1.3" display with ST7889 driver connected to a ESP32C3 board. I believe that the pin connections are fine because I managed to get some small example run…
-
### PROBLEM DESCRIPTION
Hi,
I updated my Infodisply to Tasmota 11.1.0. After the upgrade all lot of my files where renamed like this:
With Version 11.0.0 it looked like this:
M…
-
Greetings,
I am working on a project using the super-cheap STM32F103 board and I was so glad to have seen you working on an STM32 adaptation for your library.
However, the STM32 branch isn't compa…
MiLeG updated
2 years ago
-
I've installed the latest esp-idf and esp-iot-solution code.
I can't get idf.py to build my project, I can see the issue, an include (-I /home/jon/esp-idf/components/driver/include) seems to be mis…