-
Hi,
I just downloaded the `JHelioviewer_4_3_2.dmg`. After installation, when I try to run, it just opens a window, tries to load and then just stops responding.
My system details are as follows:…
-
-
Sled render crash
-
```
What steps will reproduce the problem?
1. Burn 0.2v iso into a CD
2. Reboot my pc with the live CD in
3. PC recognizes CD but freezes when logo apears
What is the expected output? What do you see…
-
```
What steps will reproduce the problem?
1. Burn 0.2v iso into a CD
2. Reboot my pc with the live CD in
3. PC recognizes CD but freezes when logo apears
What is the expected output? What do you see…
-
I have a 4 zones in sequence configuration which run every day at 3:00AM.
If I adjust more than 100% the zone's running time the schedule postpones the start time 2 days later.
If I adjust less …
-
- I've created the hardware per the schematic (Arduino Nano, SD interface only)
- I have confirmed that (by jumpering CS on the sd card interface to D10 on that board temporarily) that the Nano can r…
-
So this is my current list of the things I'm planning on working on (in a very rough priority order)...
1. ~~Create single code base for STM/LPC versions and associated build system.~~
2. Track DC42…
-
`Webcam:` HP True Vision 5MP IR camera with camera shutter, temporal noise reduction and integrated dual array digital microphones
`System:`
Kernel: 5.15.0-67-generic x86_64 bits: 64 compiler: g…
-
Some strange case, connected with DVBAPI communication
Hauppage QuadHD DVB-T/T2/C quad tuner
by default selected frontend is set to DVB-T
```
# dvb-fe-tool -a 3
Device Silicon Labs Si2168 (/dev/d…