-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
I have been working on a project where i need to data log to a flash chip so, i got the Adafruit XTSD 512M SPI flash chip and tried to use it with a Teensy 4.0, but the card failed to initialize. I ha…
-
### Describe the problem
I install in this case support for Teensy boards.
I verify that it works and notice some of the options were not enabled in boards.txt.
So I go and edit the boards.t…
KurtE updated
2 months ago