-
First, you have to activate Pi camera in raspi-config.
Adding this line to octopi.txt file solve the issue and camera will work fine.
additional_brokenfps_usb_devices=("0603:8612")
I have als…
-
Fill in fields below. If you don't know how, leave it free.
**Name of the camera*
Canon R8
Use the Marketing name.
EOS Canon R8
**USB IDs**
e.g. by running: lsusb
Bus 002 Device 002: ID…
-
```
What steps will reproduce the problem?
1. connect OTG USB cable to phone (HTC Desire C) and to camera
2. launch DLSRdashboard
3. turn on D90
4. dashboard screen says 'no DSLR camera found on USB'.…
-
USB Camera IDS U3-38J0XLE-M-GL Rev1.1
IDS Peak software (Windows 11, 64-bit, version 2.7.0.0)
MicroManager version 2.0.0
The camera works fine with IDS Peak Software.
I have copied the followi…
-
I was trying to add usb camera to my setup and got an error.
Seems that usb_cam module is not installed during initial setup:
[`rosinstall_generator ros_comm rosserial rosserial_arduino --rosdistro …
-
I am using idevice_events_subscribe to listen for devices being connected and disconnected. This works 99% of the time however if you get a prompt on the phone to allow for photo and video access ther…
-
Hi,
I successfully install libusb but wchisp info can't detect any device.
I use the WCH592F. from WeActStudio.
I use MacOS 13.5
Thanks;
-
Testing with USB MJPEG Camera.
Enable HW Decoder in 'stdafx.h', #define MF_DEVICEMFT_ENUM_HW_DECODERS 1
On Intel Meteor Lake platform,
if enable MEP (by default), CreateDecoderHW( ) ret…
-
```
What steps will reproduce the problem?
1. I'm currently trying to run this app on my rooted S2 running Omni ROM
but DSLR dashboard is not recognising camera. Phone recognised USB flash drive,
mou…
-
```
What steps will reproduce the problem?
1. I'm currently trying to run this app on my rooted S2 running Omni ROM
but DSLR dashboard is not recognising camera. Phone recognised USB flash drive,
mou…