-
### The problem
After upgrading from 2022.6.7 to 2022.7.2 my lights are not functioning the same way.
Previously turning on any of my 50+ ecosmart bulbs a mix of br30s and a19s to 4500k 100% th…
-
**Describe the bug**
The triggers registered in hass automations do not work. checked the quirk it's loading (zhaquirks.ikea.fivebtnremotezha.IkeaTradfriRemote1) and the quirk is expecting, for examp…
-
### What happened?
I run OpenHAB 3 with MQTT binding, mosquitto, and Zigbee2mqtt with ZigStar Stick v4. OpenHAB is configured so that I can enable and disable Zigbee2mqtt's 'Permit Join'. This works …
-
### What happened?
I have a setup with several Popp-TRVs (identical to Danfoss Ally TRVs), lots of Aqara sensors and two routers, all connected to a Sonoff USB Dongle 3.0 Plus. I run Home Assistant a…
-
I have the Tubes ZB CC2652P2 ethernet cordinator and im trying to update it OTA but im getting 'Update Failed: Wrong Magic Byte'
I got the firmware from here: https://github.com/Koenkk/Z-Stack-firm…
-
### What happened?
Since update 1.25.0-1 the state is always closed. The position attribute however works fine. So when it's open, it shows position 100, but state still closed. When closing, it sh…
-
@mercenaruss to continue the "ZigStar Stick" name change discussion from https://github.com/home-assistant/home-assistant.io/pull/20320
I changed "ZigStar Stick v4" to just "ZigStar Stick" in the i…
Hedda updated
2 years ago
-
**Description of problem:**
I installed everything from scratch today on a raspberry4:
- HomeAssistant OS
- hassio-zigbee2mqtt (via add-on repository from https://github.com/zigbee2mqtt/hassio-zigb…
-
**Is your feature request related to a problem? Please describe.**
In the current version of ZHA, the [round Tuya thermometer](https://www.amazon.com.au/SODIAL-Zigbee-Temperature-Control-Humidity/d…
-
Hi, sorry, my bad inglish!
When adding a device TZE200_k6jhsr0q, with 4 switches, the HA recognized only two entities, which are related to the signal of the zigbee network, they are:
sensor.tze…