-
I have a 1-wire to i2c board based on i2c-bcm2708 which also requires i2c-dev to be loaded. I have managed to load i2c-bcm2708 by adding a reference to it on a CONFIG usb stick, but i2c-dev just won't…
-
Simple proposal: a `pressure` device class for sensors. From [Wikipedia](https://en.wikipedia.org/wiki/Pressure):
> **Pressure** (symbol: p or P) is the force applied perpendicular to the surface o…
-
- [ ] Hardware used : Window 7 64
- [ ] Provide the output of command ``status 0`` :
```
[06/09/18 17:18:19] Processing sonoff-minimal (platform: espressif8266; board: esp01_1m; framework: arduino)…
-
Hello,
I have the problem that when completing the bsec_iaq.state is not generated. It should be created with or right? Completing with make.sh worked and the / bsec_bme680 outputs values.
In the …
-
Hello,
I have been using your wonderful library for the BME680 and am pretty satisfied with it except for one issue.
The gas_resistance class member always returns 0. irrespective of any setting.
…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
HassOS (Hass.io) on Raspberry Pi 3 B+
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32 WROOM
https://fr.aliexpress.com/ite…
-
The BME680 module only works if the global object initiated is named bme.
For example:
bme=require("BME680").connectI2C(I2C1);
works, while this:
BME680=require("BME680").connectI2C(I2C1)…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
'.
-->
pip on windows 10
1.12.0-dev #5d70f27
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP8266 nodemcu
**Affected componen…
-
Hi Alex,
I'm looking to try and convert this to use the SPI interface with an end goal of using multiple sensors together and was wondering if you could provide any insight.
I am pretty new to pro…
-
Please add the BME680 CircuitPython driver to Pypi. Information below:
I am following the excellent Learning Guide CircuitPython on Linux and Raspberry Pi at https://learn.adafruit.com/circuitpytho…