-
Pin PB7 on J40 (SENSOR) is not working for the inductive proximity sensor but when I connect it to PB7 J43 (BL_TOUCH) it works. The inductive proximity sensor is 24v so I need the 24v from J40 and not…
-
Please Support 4 finger tap
Thanks in advance.
-
This appears to be fixed in bugfix-2.1.x:
- https://github.com/MarlinFirmware/Marlin/issues/10390
- [ ] Test in Marlin bugfix-2.1.x branch and report issue to Marlin if it still occurs.
Example…
-
The LPC1768 has two sets of i2c pins: .0/.1 and .27/.28, but I'm not seeing where it's documented which SKR 1.3 pins these map to.
Can anyone help?
-
I installed the BTT relay v1.2 onto my skr 1.4 turbo. I used the wiring diagram from issue number five except I have my 'power off' connected to the E0/Z max pin (1.0) and the 'power loss' to the E1/Y…
-
Nothing happens whenever i use Zmax or M5 Stop pins as servos. Only Bltouch works. But i need at least bltouch and another servo working.
I redefined pins and change num_servo to 2. no luck
-
Currently using "Marlin-2.0.7.2-SKR-mini-E3-V2.0" from right here. Everything works as expected but when i enable #define SPEAKER although the buzzer on the stock display does work, this prevents the …
-
Hi,
I have the setup working with Bilinear and the BLTouch. I tried UBL and had this message when compiling:-
c:/users/admin/.platformio/packages/toolchain-gccarmnoneeabi@1.70201.0/bin/../lib/gc…
-
I just installed an E3 V3.0 on my Ender 3 Pro. This is regarding the 3 fan assignments and getting them to work correctly. I confirmed the following by checking function:
FAN0 (PC6) = Part cooling …
-
Is there an actual, workable solution for people that have the mini E3 V3.0 with an Ender 3 V2 and CR Touch (specifically)? After much research, I am gathering that many people are having similar iss…