-
Forgive me if I'm being a muppet but I've looked every where to Che k I'm not but haven't found a solution. I'm trying to connect a GPS to softserial 2 for osd use as I'm using a spectrum satellite on…
-
Could somebody please implement SRXL to be used in CLEANFLIGHT. Otherwise MULTIPLEX users cannot utilise all the nice CF features that require serial signal.
Here in Germany Multiplex is very popular…
-
FC (colibri race v2) continuously reboots after flashing BF 3.2.
-
I tried GY-63 baro board with CC3D without any success, both cleanflight 1.8.1, 1.9.0.
Baro works with arduino.
Also, unsoldering 22K pull up resistors makes no difference.
Logic analyzer i2c sequence…
-
channels 5-6 dont work? motors 5 and 6 dont spin.
-
It would be great to have a record of the current active PID settings stamped into the log, as you can then clearly see what effect the changes made. After a long day of tuning we end up with dozens …
-
In cleanflight app does show my signal from transmitter but my 4 motors do not spin at all ! HELP PLEASE!!
+6586834212 helps please add me through whatsapps thanks!!!
![untitled](https://cloud.gith…
-
Attempting to tune cleanflight altitude hold in the usual multiwii way doesn't seem to work in the same way. How does the new system work that includes the VEL PID and how do the values effect each ot…
-
Question: Do we want to include angular rates in the attitude message? These will be very similar to what's already being passed in the IMU message, so may be a waste of bandwidth. On the other hand, …
-
hi,
I have naze32 rev5 board with latest cleanflight, I mounted the board rotated 90deg with align yaw = 90)
when I open the sensor tab in gui and I roll the copter, in acc and mag display the Y-axi…