-
In the future, it would be interesting to integrate the effect of the building in the park upstream to the flow getting in the park (decrease of the wind within certain zones of the park, modifying th…
-
Dear Developer,
I hope this message finds you well. I am writing to seek your assistance regarding a critical and foolish mistake I made on the server. Unfortunately, in a moment of carelessness, I…
-
When I used the CLI functionality to compute a smoothed DM density field, the RT parameters were reset to all zeros. I assume this happens for the other options (write potential, cooling time) because…
-
_From @rainbowdesign on October 4, 2018 11:52_
It would be nice to add an interface to the aquatuner that sets the target cooling temperature. It should change the power consume and heat output accor…
-
please add suuport Xiaomi Smart Humidifier 2 (MJJSQ05DY) CN
-
The 4600H seems to be locked to 54W maximum. This is the default TDP for the CPU in my laptop, but its cooling system can exceed 54W, as it's capable of over 60W heat dissipation.
Is there any reas…
-
Issue overview
--------------
The attached [example file](https://github.com/TiejunWu/EnergyPlus-IDF-Files/blob/master/ZoneVSWSHP_wDOAS1.idf) is based on the EnergyPlus installed example file "ZoneV…
-
Hello, first of all, thank you very much for your code.
Unfortunately, it didn't work right away...
The line **153** with: **sprintf(path, "/sys/class/thermal/thermal_zone%d/temp", priv->cputher…
-
currently, defrost logic is based on the last run duration and keeps drying evaporator after the run and prevent start again before time x is run out.
todo/TBD:
- pump down if hot gas is hitting t…
-
Hi together,
i was wondering if it could be usefull to have a delay for the fan turning off after a cooling or heating cycle.
I already tried to implement by myself but i'm new to coding and so I …