-
## The problem
Unable to initialize appium driver.
## Environment
- Appium version (or git revision) that exhibits the issue: 1.22.3
- Last Appium version that did not exhibit the issue (if a…
-
The integration is running fine, but I do have some questions about the handling and display of information:
# Energy consumption
In the diagnostic file the is a section about the `consumptionData…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
in Onecta app it is possible to set the temp of the water tank , not found that control in your integration , and as there is no useful schedule for water in the app , or the controller , the a…
-
## Bug report
32MB FLASH 8MB PRAM ESP32-S3-DevKitC1(ESP32-S3-DevKitC-1-N32R8V)
**Problem**
**Steps**
1. Modify env:demo to compile properly for the chip (#579)
```
[env:demo]
…
-
**Faikin hardware**
Faikin hardware, purchased on Amazon on the 6th of December 2023
**Daikin hardware**
S21 lead
**Describe the bug**
After startup the homeassistant log is full of messages …
-
**Faikin hardware**
(Not relevant, software issue)
**Daikin hardware**
(Not relevant, software issue)
**Describe the bug**
The config webpage of the faikin exposes the passwords in the passwo…
-
Hallo Johnny.
First of all, a big thank you for your work!
I installed your integration yesterday.
Unfortunately, I can't transfer any values (new Demand Control) from HomeAssitant to the Onect…
-
**Daikin hardware**
S21 FTXM20R2V1B
**Is your feature request related to a problem? Please describe.**
The minimum temperature which is set on the aircon is 16° set by auto mode. This leads to my…
-
Hallo Ingo!
Leider habe ich jetzt auch immer öfter diese Fehlermeldung, eine Steuerung ist nicht mehr möglich. Erst wenn ich die App am Handy aktiviere, die Anlage damit ein-/ausschalte ist der ioBro…