-
### Describe the bug
System hangs after jumping from U-Boot to Linux, at "Starting kernel ...".
Nothing happens after above message: The console stays quiet despite enabled "earlycon", the etherne…
-
I used Etcher to install "2018-04-22_2018-04-18-fullpageos-stretch-lite-0.9.0" to my SD card. Then edited the "fullpageos-wpa-supplicant.txt" file to connect to wifi. Plugged everything in and turned …
Jaxel updated
7 months ago
-
**Describe the bug**
I have a custom board with a STM32H562 and it has a display using the FMC. When I use CubeMX I can make it work, but with Zephyr not yet. Luckily I have 2 boards so it's easier…
-
不是sw799,但是固件刷的ophub上的 Armbian_24.5.0_rockchip_sw799_jammy_5.15.152_server_2024.03.16.img 可以开机,但是typec和pcie无法正常使用,typec插入OTG typec的线之后,不识别插入的设备,甚至设备上的电源灯都不亮。
原固件的dtb和 \sys\firmware\devicetree\base目录已上…
kesry updated
2 months ago
-
When installing through portmaster and running on ambernic rg353p it's all zoomed into a corner and you can't really see anything.
Unsure where to post the bug.
Here, OS github, or portmaster github…
-
Visual Studio Code is a really nice development environment, even someone such as myself who has stuck with vim for many years is considering switching over to it.
It would be cool if we could prov…
-
Hi, me again :p
(maybe you already know what im goin to say)
I just saw your qml code.
I dont know if you do like this ,on your mixtrack because it is natively supported, but on my side to be able…
-
### What happened?
After building nqptp I ran:
pi@pi00:~/nqptp $ sudo systemctl enable nqptp
Failed to enable unit: Unit file nqptp.service does not exist.
I know the issue, I use Chrony f…
-
## Introduction
Hi, I've been working with few chips using PM and PM_DEVICE recently and found some lack of clarity in the PM APIs and how/when they should be used.
### Problem description
Th…
-
### Which feature would you like to have?
Hi,
I'm struggling to install system on klipad50, that's MKS device, no commonly used yet. It's like combo of IPS50 touchscreen, MKS PI and RTL8723BS (if i'…